Yanmar SD60, Руководство по эксплуатации

Страница: 33 / 44

PERIODIC MAINTENANCE
SD60 Operation Manual
29
3. Align the splines and insert the
propeller on the propeller shaft.
The propeller shaft must fit evenly on
the splines.
Figure 19
4. Wipe off excess grease.
Install the propeller shaft nut.
Figure 20
5. Place a block of wood between one of
the propeller blades and the hull.
Mount the special insert T2 on a
suitable torque wrench and insert into
the hole in the propeller nut and tighten
to a torque of 125 N·m.
Figure 21
6. Install the locking screw in the center.
Tighten the locking screw to a torque of
23 N·m.
Figure 22
050910-01X01
050914-01X00
050915-01X00
T2
050916-01X00
SD60_OPM.book 29 ページ ２０１７年１２月８日 金曜日 午後３時６分