EF393T OM
59
10-1. Check batter
y
Check whether the electrolyte level is between upper and
lower limit lines.
If the electrolyte level is close to the lower limit line, add
purified (or distilled) water.
Adding water
(1) Remove vent plugs.
(2) Add purified water to the upper limit line.
(3) Tighten vent plugs.
IMPORTANT
Make sure the tractor is level when checking electrolyte
level.
Never add purified water over the upper limit line.
Be sure to use purified water specified for battery.
(A) Negative (ground) terminal
(B) Positive terminal
(C) Upper limit line
(D) Lower limit line
(E) Fixing nut, 2 pieces
(F) Vent plug, 6 pieces
WARNING
It is recommended to replace battery promptly if under
mentioned situation occurs.
- If the electrolyte level is kept below the lower limit line
while operating, it may accelerate deterioration of internal
metals and decreasing of electrolyte. It may result
explosion of battery.
- If the inner metal plates are exposed because of
decreasing electrolyte, addition of water cannot
compensate and there is a risk of explosion.
10-2. Removing and installing battery
Remove
(1) Open the bonnet.
(2) Disconnect the negative (ground) cable first from the
battery.
(3) Disconnect the positive cable.
(4) Loosen fixing nuts and remove the battery.
Installation
(1) Connect positive cable first.
(2) Connect negative cable.
(2) Tighten fixing nut.
(A) Negative (ground) cable
(B) Positive cable
(E) Fixing nuts
IMPORTANT
1) When connecting the battery cables, wipe oil away from
the terminal contacts. After connecting cables, apply
grease to the terminals.
2) Be sure to attach the rubber boots for the positive
terminal of the battery.
3) When replacing the battery, be sure to use the genuine
battery or equivalent specified in the right table
4) For environmental protection and recycle of resources,
return the old battery following the regulation of your
place.
Battery type
Specified battery
Parts code No.
75D26R 1A7781-51500
Voltage 12
Volts
Capacity 5HR
52 AH
Charging rate
6.5 Amperes