15
OPE_EF312T&352T_en.doc
Remove radiator cap only when coolant temperature is
cool. Wait at least one hour to allow coolant to cool
down.
Cover radiator cap with a cloth before opening and
gradually release pressure before completely removing
cap.
Do not service hydraulic system when hydraulic oil is
hot.
Do not adjust relief valves to higher pressure than
tractor or implement recommended specifications.
Do not close off overflow or bypass lines.
Hydraulic oil or diesel fuel escaping under pressure can
penetrate the skin, causing serious injury. Before
disconnecting lines, be sure to relieve all pressure.
Before applying pressure, be sure all connections are
tight and all components are in good condition.
Fluid escaping from very small hole can be almost
invisible. Wear safety goggles for eye protection and
use a piece of cardboard to check for suspected leaks.
Do not use your hands. If injured by escaping fluid, see
a doctor at once. Serious infection or other problems
can develop if proper medical treatment is not
administered immediately.
Disconnect battery ground cable before working on
electrical system or working in any area where you
might come in contact with electrical components.
Disconnect ground cable first and replace at last.
