manualshive.com logo in svg

Yanmar 6LT Series, Руководство по эксплуатации, Страница: 25 / 76

Поделиться
Скачать
Yanmar 6LT Series Скачать руководство пользователя страница 25

PRODUCT OVERVIEW

6LT Series Operation Manual

21

VC20 has the following functions, which can be set in the Utility screen of MAIN MENU in the Digital 
Display. For more details, refer to the Vessel System Installation Manual.

Station Protect

It is a function to prevent the operation from the other stations while steering.

• Select “YES” to enable “Station protect”. The display and control head of that station can no longer be 

operated.

• Select “NO” or turn off the system power to disable “Station protect”.

Sys on by ID, Start by ID

It is a function to check ID for the purpose of anti-theft.

• If you select “YES” in “Sys on by ID”, it is necessary to enter the Owner ID on the display when turning on 

the system power. If you select “YES” in “Start by ID”, it is necessary to enter the owner ID on the display 
at engine start.

• The initial ID is “00000” and it can be changed with the below “Owner ID change” function.

• Even when the system power is turned off, the selected “Sys on by ID” and “Start by ID” cannot be 

disabled and it is required to enter the Owner ID at each time.

• After entering the ID and verification, if you don’t operate for 10 seconds, the entry becomes invalid and it 

is required to enter the Owner ID again.

Owner ID Change

The ID used in “Sys on by ID” and “Start by ID” can 
be set and changed as follows.

• If you select “Owner ID change”, the ID 

verification screen is displayed and you are 
asked to enter the current ID (Default: “00000”).

• If you enter the wrong ID 5 times, the ID is locked 

and you are no longer able to make an input. The 
lock can be released by turning off the system 
power.

• ID can be changed to any 5 digit number from 

00000 to 99999.

• Select the number from 0 to 9 with the 

 

 

buttons. The fixed number is displayed by an 
asterisk when you press the 

 button and the 

next digit is highlighted.

• Press the [ENTER] button after highlighting it with 

the 

 button when all 5 digits are entered and the 

new ID becomes valid.

Figure 18

Figure 19

3

Owner ID change

Input new Owner ID made

RI¿YHGLJLWVWRUHSODFH

current Owner ID

3

Enter

Содержание 6LT Series













































































Отзывы:

Нет отзывов