Yanmar 2V Series, Руководство по эксплуатации

Страница: 53 / 112

BEFORE YOU OPERATE
2V Operation Manual 37
Checking Engine Oil
1. Make sure engine is level.
2. Remove oil cap / dipstick (Figure 4, (1)) and
wipe with clean cloth.
Figure 4
3. Fully reinsert oil cap / dipstick but do not
screw in .
4. Remove oil cap / dipstick. The oil level should
be between upper (Figure 4, (2)) and lower
(Figure 4, (3)) lines on the oil cap / dipstick.
5. Fully reinsert oil cap / dipstick (Figure 4, (1))
and hand-tighten. Over-tightening the oil
cap / dipstick will damage it.
Adding Engine Oil
1. Make sure engine is level.
2. Remove oil cap / dipstick (Figure 5, (1)) .
Figure 5
3. Add indicated amount of engine oil at the side
engine oil filler port (Figure 5, (2)) .
4. Wait three minutes and check oil level.
5. Add more oil if necessary.
6. Replace oil cap / dipstick (Figure 5, (1)) and
hand-tighten. Over-tightening may damage the
cap.
0002421
(1)
(2)
( 3 )
(2)
0002421B
(1)