YANGZI YZ-X6, Инструкция по эксплуатации

Страница: 4 / 13

3
Machine usage
Before the first use, adjust the equipment to the best cleaning effect.Before each
use, routine inspection is required:
◆ Whether the seal strip of sewage tank cover comes off
◆ Is the sewage tank cleaned
1. Insert the suction pipe
Insert one end of the suction pipe into the inlet of the sewage tank and the other end
into the exit of the tail flap.This is shown on the right
2. Fill with water
Please observe the water level through the water level pipe. If the water is insufficient,
Please fill it with clear water
◆ Open the lid of the clean water tank
◆ Put clean water into the water tank (put the water pipe into the tank first, then open
the water valve, the water temperature is not higher than 50℃ , the water level can be
observed through the water level pipe)
◆ Add detergent, the amount can be added according to the needs of the ground
◆ Close the water tank cover
3. Water regulation
◆ Open the discharge valve and adjust the water amount according to the actual needs
Pull out the rubber plug
Remove the screw with
a Phillips screwdriver
Open the
chassis
fuse
Relay 1:
Control
the brush
motor
Relay 2:
Control the
suction
motor