YANGZI YZ-X5, Руководство по эксплуатации

Страница: 16 / 18

YZ-X5
14
service center
Motor carbon brush wear Please contact the
service center
fan not working Suction motor noise is too
loud
Please contact the
service center
Suction motor burned out Replace the suction motor
carbon brush wear Please contact the
service center
Little or no water flow out Clogged water tank drain
valve or water pipe
Clean or replace the
solution tank drain valve
Drain valve closed Open the drain valve
Inefficient recycling of
sewage
recovery tank full Drain the recovery tank
Absorbent strip wear Replace the absorbent
strip
Suction motor failure Replace the suction motor
Damaged recovery tank seal Replace the seal
The voltages of the two
batteries are not equal
Please contact the
service center
Battery charging failure Repair or replace the
charger
Chapter 5 Maintenance
Machine life and operational safety must be ensured by proper and routine
maintenance of the machine. The routine maintenance requirements are tabulated below.
Under suitable working conditions, the maintenance interval can be changed, which must
be determined by the professional responsible for the maintenance.
To perform maintenance operations, the machine must be stopped (remove the start
switch key), so please read the safety section of the manual carefully.
Conditions of Use
●Ambient temperature: -10
℃～
40
℃
●The relative humidity of the air: 5%
～
70%
●No conductive dust, no explosion hazard environment
● An environment that does not contain gases or vapors that corrode metals
●Indoor use, ventilated, non-vibration environment, front and rear space at least 300mm
Maintenance schedule
Maintenance operation On
handover
Every10h Every50h Every100
h
Every200
h
Every500
h
Brush Disc Height Adjustment Check
Whether the brush plate is wired or
entangled
Squeegee Cleaning Complete
Inspection
Tank cover seal inspection
Screw and nut tightening inspection
Check the wear of the brush disc
Replacement of absorbent strips