Shenzhen Yangda Security Co., Ltd
Add:3F, Block 5, Ji An Tai Industrial Area,XiHe,FuYong,
BaoAn district,ShenZhen,China, 518057
Email: [email protected] Web: www.yangdaonline.com
Gimbal control
1)Yaw axis control:speed mode,connect Rocker channel(or 3 gears channel,push gear
to middle position to stop)
2)Pitch axis control:speed mode,connect Rocker channel(or 3 gears channel,push
gear to middle position to stop)
3)Mode control:angle mode,connect knob channel(speed mode:connect 3 gears
channel or rocker channel)
If connecting knob channel,rotate to one end,the gimbal is at lowest speed when
controlling YAW and PITCH axis.
Rotate the knob to any position,gimbal is at higher speed when controlling YAW and
PITCH axis.Rotate to knob to another end,gimbal back to center position.
4)Multi:tracking function control
Camera control
1)Zoom control:connect 3 gears or rocker channel
2)Focus:connect 3 gears or rocker channel for manual focus control.If do not connect
any channel,then camera will auto focus after zooming
3)Pic/REC:taking picture/recording,connect 3 gears channel
Flip the gear from middle position to high position,taking picture/recording
mode switch
Flip the gear from middle position to low position:
A:If under recording mode:record start,flip from middle to low again,record stop
B:If under taking picture mode,start taking picture
yangdaonline.com
