YAMPE 2205, Руководство пользователя

Страница: 6 / 11

6
end of the pole arrive to the flange set. According to the screw hole on flange set, drill
3 holes of 12 mm diameter on the pole with drilling machine. Fasten with three pieces
of socket screws (M10x50mm) and tighten with nuts. (Flange set is closely marched
with tower, which requires punching after installation by customers, so the tower we
provide has no punching)
2. Connection between flange and tower
Connect cable respectively with three lines at the bottom of the head, then
pierce cable from the center of tower and short-circuit three cables of wind generator;