Yamato WBV4A, Инструкция по эксплуатации, Страница: 9 / 26

WI-FI Network Bridge um-R1.3
8
4 ACCESSING THE WI-FI BRIDGE
4.1 Testing Wi-Fi connectivity
On a computer or smart-phone connected to the same local network as the Wi-Fi Bridge, navigate to
Http://WBV-nnnn/ or http://WBV-nnnn.local/ .NOTE: Some Wi-Fi access points and Routers do not allow
clients to broadcast its mDNS or NetBIOS names. If you can’t find your Wi-Fi bridge after it is showing a Green
color LED, ask your IT person to find out the IP address of the WBV device and use it to access the bridge (ex:
http://123.123.123.123/ and also ask for the WBV-nnnn be added to the local DNS server. Once the Bridge
gets an IP address it will always try to use that same IP, even after Power off.
Before the Main Menu screen is displayed, an authentication pop-up appears. It asks for Username and
Password information. For now, the Use name is fixed at
“ WBV user”
and password is
“Yamato”
. After
entering these credentials, the Main Menu screen should be displayed. There, you can easily go to the local
File Editor tool, see temperature log charts, update the firmware or navigate to the Remote Operations page.
Just click one of the available buttons. Use the command line field to enter pre-defined commands to the
Bridge and see results in the window immediately below it. They are
case insensitive (typing “help” is same as
typing “HELP”, “T” = “t”, etc. The “help” command will display the available commands for the firmware
version you have on that device.
F
IGURE
6 - A
UTHENTICATION SCREEN