Yamato MK201D, Инструкция по эксплуатации

Страница: 16 / 22

13
Maintenance Method
Daily Inspection and Maintenance
WARNING!

Disconnect the power cable from the power source when doing an inspection or maintenance
unless needed.

Do not disassemble this unit.
CAUTION!

Use a well-drained soft cloth to wipe dirt on this unit. Do not use benzene, thinner or cleanser for
wiping. Do not scrub this unit. Deformation, deterioration or color change may result in.
When not using this unit for long term / When disposing
CAUTION!
When not using this unit for long term…

Turn off the power and disconnect the power cord.
WARNING!
When disposing…

Keep out of reach of children.

Remove the driving parts.

Treat as large trash.
Environmental protection should be considered
We request you to disassemble this unit as possible and recycle the reusable parts considering to the
environmental protection. The feature components of this unit and materials used are listed below.
Component Name Material
Exterior Parts
Frame Steel plate baked with melamine resin coating
Production plates Polyethylene (PET) resin film
Shaking parts
Shaking table Stainless steel plate baked with melamine resin coating
Electrical Parts
Motor
Motor case, rotor, shaft: made of iron
Bracket: aluminum
Coil: copper wire (epoxy resin insulation coating)
Power cord & wiring
materials and others Wiring materials and circuit boards coated with synthetic rubber and
resins