6
2. Before operating the unit
Precautions on installation
Cautions
6. Connect the power plug to the dedicated outlet
Use an outlet that is suited to the electrical capacity.
Electrical capacity
：
AC100V 0.6A
*
When the unit does not start even when power is turned ON, check if main voltage is too low
or if the unit is connected to the same power line as other devices. If this is the case, use a
different power line from those for other devices as the power supply.
7. On installation
An earthquake or a shock may cause the unit fall over or move and personal injuries may
result. We recommend exercising safety precautions including selecting an installation place
where less people are passing by. Also, touching the shaking assembly during operation is
dangerous. We recommend installing appropriate fence around the installation site.
8. About use in a constant temperature oven
When you use the unit in a constant temperature oven at a constant temperature, keep the
environmental temperature in the range from
５℃
to
３５℃
. Do not use the unit in a
humidified atmosphere.
9. Handling of a power cord
Never use electrical power cords bundled. When these are used bundled, they might
overheat causing a fire.
Do not convert, forcibly bend, twist or pull the power cord. Otherwise, a fire or an electrical
shock may result.
Do not place the power cord under a desk or a chair, or sand between objects to avoid it
from being damaged.
Otherwise, a fire or an electrical shock may result.
Do not place the power cord close to a stove or other heat generating device. Sheath of the
cord may burn and result in a fire or an electrical shock.
If the power cord should be damaged (exposure of core wire or disconnection), immediately
turn the ELB off, pull out the power cord (plug) out of the power supply and ask your dealer
to replace the cord. Operating the unit with a damaged power cord may cause a fire or an
electrical shock.
Connect the power cord to an appropriate wall outlet.