25
4. Operation Method
Quick Auto Stop Operation
This operation is used to specify the period up to automatic stop, i.e., sets the auto stop timer during
operation.
Quick auto stop
operation procedure
1. Set the time up to stop during fixed temperature
operation
①
Check that the FIXED TEMP lamp lights on and that the unit
is under operation. Press the TIMER key.
The measurement temperature display screen displays the
character "tim"
, which indicates the timer setting.
The setting temperature display screen displays the current
setting time with blinking.
②
Select the time by pressing the "
▼▲
".
Timer function:
The maximum setting time is "999 hours and 50 minutes".
The time can be set in increments of a minute under 99 hours
and 59 minutes.
It can be set in increment of ten minutes over 100 hours.
The "
▼ ▲
"can change the setting time quickly when it is
pressed continuously. Press them discontinuously when fine
adjustment is needed.
2. Start timer operation
Press the RUN/STOP key for one second after deciding the
time.
Timer operation starts with the FIXED TEMP and AUTO STOP
lamps lighting on.
The timer is activated at the point when the RUN/STOP key is
pressed.
3. Stop/terminate timer operation
The operation stops automatically at setting time.
Buzzer continues to sound for about five minutes at operation
stop.
The setting temperature screen displays the character
"End"
, which indicates termination of operation, with
the FIXED TEMP and AUTO STOP lamps lighting on. Press
the RUN/STOP key to terminate the timer operation mode.
The screen returns to the initial setting screen.
ALARM
AUTO STOP
AUTO START
FIXED TEMP.
ENTER
FIXED
TEMP.
TIMER
SUB
MENU
RUN
STOP
HEATER
SET TEMP.
OVER TEMP.
PROTECTOR
ALARM
AUTO STOP
AUTO START
FIXED TEMP.
ENTER
FIXED
TEMP.
TIMER
SUB
MENU
RUN
STOP
HEATER
SET TEMP.
OVER TEMP.
PROTECTOR
ALARM
AUTO STOP
AUTO START
FIXED TEMP.
ENTER
FIXED
TEMP.
TIMER
SUB
MENU
RUN
STOP
HEATER
SET TEMP.
OVER TEMP.
PROTECTOR
②
①
