28
Operation Method
Edit Program
Edit segment
One segment has ten kinds of set item. (*:Optional function)
No.
Name
Setting range
1
Ramp time
Step, 1 minute to 999 hours, end
2
Set temperature
Within the range of set temperature for the device
3
Soak time
0 minute to 999 hours, hold
4
Wait mode
OFF, ON
5
Repeat starting segment
None, registered segment number 1 to 16
6
Repeat time
1 to 999, infinite
The conception of a segment is shown in the figure below. The “Initial Temperature” means the
in-furnace temperature when executing segment No. 1 just after the program operation is
started, and also means the set temperature of segment executed last in the case other than
mentioned above.
Lamp time
Sork time
Time
Setup temp
Temp
Start temp
The conception of a repeat is shown in the figure below. The first execution of the repeat
interval is not counted as a repeating time.
segment No.4
start repeat
segment: 2
repeat time: 5
segment No.1
no repeat
instruction
segment No.2
no repeat
instruction
segment No.3
n o repeat
instruction
segment No.5
no repeat
instruction
5 repeating
of interval
