![background image](http://html1.mh-extra.com/html/yamato/dr-200/dr-200_instruction-manual_3162360011.webp)
8
Before Using this unit
Requirements for Installation
12. Handling of power code
Do not entangle the power cord. This will cause overheating and possibly a fire.
Do not bend or twist the power cord, or apply excessive tension to it. This may cause a fire
and electrical shock.
Do not lay the power cord under a desk or chair, and do not allow it to be pinched in order to
prevent it from being damaged and to avoid a fire or electrical shock.
Keep the power cord away from any heating equipment such as a room heater. The cord's
insulation may melt and cause a fire or electrical shock.
If the power cord becomes damaged (wiring exposed, breakage, etc.), immediately turn off
the power at the rear of this unit and shut off the main supply power. Then contact your
nearest dealer for replacement of the power cord. Leaving it may cause a fire or electrical
shock.
Connect the power plug to the receptacle which is supplied appropriate power and voltage.
13. Before starting operation...
Foreign odor and/or smoke presents at the beginning of the operation because the additive
(natural rubber) used as door packing and the insulation of the unit heats up. Bake inside the
unit without samples at high temperature in a well-ventilated place to reduce odor and lost
smoke before starting operation.
Содержание DR 200
Страница 2: ......