Yamato AW-WLG Series, Руководство по обслуживанию, Страница: 9 / 14

8
POWER SUPPLY
To apply power to the scale
using the supplied 15VDC, 300
mA power supply, insert the
plug from the power supply
cable into the power jack on the
back of the scale and then plug power supply into the proper electrical
outlet. The scale is now ready for operation.
INSTALLING THE BATTERY
The scale can use four (4) AA size batteries (not included). If you wish
to operate the scale from batteries, you must first obtain and install the
batteries. Access is via a removable cover on the bottom of the scale.
Battery Installation/Replacement
1.
Turn scale over so that display is facing down and place it upside down
on a flat level surface, such as a table or bench.
2. Locate battery cover on bottom of scale and turn locking tabs
counterclockwise.
3. Remove battery cover (lift straight up and slide it out) exposing battery
holder.
4. If installing new batteries, proceed to step 5. If replacing batteries,
–
+
–
+
Cov
er