YAMARIN 65 Day Cruiser, Руководство пользователя

Страница: 17 / 40

Yamarin 65 Day Cruiser
17 (40)
The owner of the boat is responsible for ensuring that there is at least one baler or bucket on
the boat and that it has been secured.
WARNING! The bilge pump system is not intended to cope with a leakage
caused by running aground or other equivalent damage.
PRECAUTION!
Regularly check to ensure that there is no debris at the end of the
suction hose for hand pump. The bilge pump suction hose is
located in the rear end of bilge. You have a service access through
rear compartments inspection hatch.
WARNING! Always keep the drainpipe shut when its inboard end is constantly
below the waterline due to the load. The shut-off flap on the
transom only prevents water from entering the boat when
reversing!
NOTE! Make sure that water can flow unobstructed through the drainpipe.
For instance, autumn leaves may obstruct the water flow, which
can cause the boat to fill with water and sink. The bilge pump
system does not work in conditions below 0°C.
NOTE!
There is always some amount of condensed water in the bilge. As
the boat ages, there is a risk that a small amount of water may
come through the hull bushings. Always remember to check the
bilge, via the inspection hatch under the aft seat, before you leave
the boat at quay or buoy and always before setting off. Have an
authorised repair shop check for possible leaks.
WARNING! The boat's handling properties may become extremely dangerous,
if there is water in the bilge.
WARNING!
In rough weather, the hatches and drawers should be kept shut to
minimise the risk of them filling with water.
5.6.2 Stability and buoyancy
Please note, that stability is reduced by any weight added high up. Any change in the
distribution of the weight onboard may significantly affect the stability, trim and performance
of your craft. However, please remember that large breaking waves always present a serious
danger to stability.
The boat does not float if filled with water. In accordance with the Recreational Craft
Directive boats with a length of 6 metres or more do not need to float if filled with water.