background image

5

6

Safety P

recautions

Safety P

recautions

ATTENTION

Pressing the device stronger than 
necessary or using it intensively on a 
single area may damage the skin.

Do not press the device strongly 
or use it intensively on a single 
area.

Prohibition

Failure to comply may lead to 
accidents due to malfunctions of 
the device.

Do not allow the device to come 
into contact with another 
beauty device or electronic 
appliance while the power is on. 
Do not use with other electronic 
products (electric blankets/bed 
sheets, heated tables, etc.) at 
the same time.

Prohibition

Failure to comply may cause 
accidents or injuries.

Do not use while driving.

Prohibition

If the mode is used for continuous 
treatments, the head will not 
become fully cool. 
Have an interval of at least 
30 minutes between treatments.

Do not use COOL Mode 
continuously.

Prohibition

The main unit is water-resistant 
(IPX4). Do not intentionally splash 
water on the device as it is not 
designed to withstand strong water 
pressure from showers or faucets, 
nor to be submerged in water. 
Failure to comply may cause a 
malfunction of the device.

Do not expose the device to 
strong water pressure from 
showers or faucets nor submerge 
it in water.

Prohibition

Stop using the device immediately if 
the treatment does not agree with 
your skin. If symptoms persist the 
following day and beyond, consult 
a physician.

Check carefully that your skin is 
not showing any abnormalities 
during the treatment. Stop using 
the device immediately if you 
start to feel pain, fatigue or if 
you see any skin reaction during 
use.

Must Comply

Make only gradual adjustments to 
the intensity level. Failure to comply 
may cause accidents or injuries.

Use only Level 1 upon the first use 
and until you are accustomed to 
use. 
Even if you do not feel any 
stimulation, make only small 
adjustments to the intensity 
level. 
Use the device at an intensity 
level that suits you.

Must Comply

ATTENTION

When using on the same area 
again, be sure to leave an interval of 
24 or more hours between 
treatments. Excessive use may 
damage the skin. The above 
recommendations are guidelines 
only; please observe your skin 
condition and use the device 
accordingly.

Avoid using the device on the 
same area for longer than 14 
minutes.

Must Comply

You may feel strong irritation or 
discomfort due to EMS on your 
cheeks or chin.
If you feel strong discomfort, 
consult a physician.

If you are currently undergoing 
dental treatment or have teeth 
fillings, choose a lower intensity 
level and apply the device to a 
different area.

Must Comply

Failure to comply may cause an 
accident.

If a power failure occurs, turn off 
the power immediately and 
unplug the device from the power 
outlet.

Removing 

the plug

Failure to comply may cause 
damage to your eyes or skin.

Do not look directly into the LED 
light. When using the LED light 
to treat the upper eyelids, lower 
eyelids and outer corners of the 
eye, be sure to close your eyes 
and keep the electrode head at 
least 5 cm away from the skin.

Prohibition

Содержание M22















Отзывы: