Yamaha YZFR3F, Руководство пользователя

Страница: 25 / 106

INSTRUMENT AND CONTROL FUNCTIONS
4-8
4
TIP
After resetting the average fuel con-
sumption display, “_ _._” is shown until
the vehicle has traveled 1 km (0.6 mi).
Oil chan g e tripmeter
The oil change tripmeter shows the
distance traveled since it was last reset
(i.e., since the last oil change).
The oil change indicator “OIL” will flash
at the initial 1000 km (600 mi) and every
5000 km (3000 mi) thereafter to indi-
cate that the engine oil should be
changed.
After changing the engine oil, reset the
oil change tripmeter and the oil change
indicator. To reset them both, select
the oil change tripmeter, and then push
the “RES” button for one second.
Then, while “OIL” and the oil change
tripmeter are flashing, push the “RES”
button for three seconds. The oil
change indicator will be reset.
If the engine oil is changed before the
oil change indicator comes on (i.e., be-
fore the periodic oil change interval has
been reached), the oil change tripmeter
must be reset for the next periodic oil
change to be indicated at the correct
time. Shift timin g in d icator li g ht
The shift timing indicator light has four
settings which can be adjusted.

Flashing pattern: this function al-
lows you to choose whether or not
the indicator light will come on and
whether it should flash or stay on
when activated.

Activation point: this function al-
lows you to select the engine
speed at which the indicator light
is activated.

Deactivation point: this function
allows you to select the engine
speed at which the indicator light
is deactivated.
1. Oil change indicator “OIL”
2. Oil change tripmeter
2 1
1. Shift timing indicator light
2. Brightness level display
1
2
km/h
U2MS70E0.book Page 8 Thursday, December 18, 2014 1:46 PM