manualshive.com logo in svg

Yamaha YZFR1V(C), Руководство пользователя

Поделиться
Скачать
Yamaha YZFR1V(C) Скачать руководство пользователя страница 26

INSTRUMENT AND CONTROL FUNCTIONS

3-8

3

NOTE:

To change the display back to the prior
mode, push the “SELECT” button for a
few seconds.

Coolant temperature display

The coolant temperature display indi-
cates the temperature of the coolant.
Push the “RESET” button to switch the
coolant temperature display to the air
intake temperature display.

NOTE:

When the coolant temperature display
is selected, “C” is displayed for one
second, and then the coolant tempera-
ture is displayed.

CAUTION:

ECA10020

Do not operate the engine if it is
overheated.

Air intake temperature display

The air intake temperature display indi-
cates the temperature of the air drawn
into the air filter case. Push the “RE-

SET” button to switch the coolant tem-
perature display to the air intake
temperature display.

NOTE:

●

Even if the air intake temperature
is set to be displayed, the coolant
temperature warning light comes
on when the engine overheats.

●

When the key is turned to “ON”,
the coolant temperature is auto-
matically displayed, even if the air
intake temperature was displayed
prior to turning the key to “OFF”.

●

When the air intake temperature
display is selected, “A” is displayed
before the temperature.

Self-diagnosis devices

This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
engine trouble warning light will come
on, and then the right display will indi-
cate a two-digit error code (e.g., 11, 12,
13).

If the right display indicates any error
codes, note the code number, and then
have a Yamaha dealer check the vehi-
cle.

CAUTION:

ECA11590

If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.

Display brightness and shift timing
indicator light control mode

This mode cycles through five control
functions, allowing you to make the fol-
lowing settings in the order listed be-
low.

●

Display brightness:
This function allows you to adjust
the brightness of the displays and
tachometer to suit the outside
lighting conditions.

●

Shift timing indicator light activity:
This function allows you to choose
whether or not the indicator light
should be activated and whether it
should flash or stay on when acti-
vated.

U5VY12E0.book  Page 8  Thursday, August 4, 2005  4:37 PM

Содержание YZFR1V(C)




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды