Yamaha YZF690 2022, Руководство по обслуживанию

Страница: 14 / 17

1-5
FEATURES
This display shows the coolant temperature from
40
°
C to 116
°
C in 1
°
C increments.
If the message “HI” flashes, stop the vehicle,
then stop the engine, and let it cool.
TIP
• When the coolant temperature is below 40
°
C,
“Lo” will be displayed.
• The coolant temperature varies with changes
in the weather and engine load.
Air temperature display
This display shows the air temperature from –9
°
C to 50
°
C in 1
°
C increments. The temperature
displayed may vary from the actual ambient tem-
perature.
TIP
When the temperature is below –9
°
C, “_ _” will
be displayed.
Display brightness and shift timing indicator
light settings mode
The following settings can be adjusted in order:
• Display brightness
• Shift timing indicator light ON / FLASH / OFF
• Shift timing indicator light ON r/min
• Shift timing indicator light OFF r/min
• Shift timing indicator light brightness
To access the settings mode
1. Turn the vehicle off.
2. Hold the “SEL” switch, turn the vehicle on and
continue holding the “SEL” switch until the
display changes to the display brightness
control mode.
3. Use the “RES” switch to change the setting
values.
4. Push the “SEL” switch to confirm the selected
setting value and cycle to the next setting in
the order listed above.
TIP
The settings mode will exit after all settings are
confirmed.
Display brightness
An brightness level indicator bar will appear at
the bottom of the display. Use the “RES” switch
to select the desired brightness level and push
the “SEL” to confirm it.
Shift timing indicator light
The shift timing indicator light has 3 settings:
• ON setting: the shift timing indicator light will
come on when the set engine speed is
reached. When this setting is selected, the in-
dicator light will come on and stay on until the
next setting is selected using the “RES” switch
or confirmed with the “SEL” switch.
• FLASH setting: the shift timing indicator light
will flash when the set engine speed is
reached. When this setting is selected, the shift
timing indicator light will flash 4 times per sec-
ond until the next setting is selected using the
“RES” switch or confirmed with the “SEL”
switch.
• OFF setting: the shift timing indicator light is
deactivated. When this setting is selected, the
shift timing indicator light will flash once every 2
seconds until the next setting is selected using
the “RES” switch or confirmed with the “SEL”
switch.
Shift timing indicator light ON r/min
The shift timing indicator light can be set be-
tween 6000 r/min and 12000 r/min in increments
of 200 r/min. While changing this setting, the
shift timing indicator light will come on and stay
on and the selected increment will be displayed
on the tachometer. Use the “RES” switch to se-
lect the desired engine speed for activating the
shift timing indicator light.
1. Air temperature display
1
1. Display brightness
1