background image

Instrument and control functions

4-18

4

The breather hose prevents a vacuum
condition from forming within the fuel
tank.
The overflow hose drains excess gaso-
line and directs it safely away from the
vehicle.
Before operating the vehicle:

check each hose connection.

check each hose for damage.

confirm the end of each hose is
not blocked.

confirm each hose is positioned
as shown.

TIP

YZF690N: See page 7-11 for canister
information.

EAU13435

Catalytic converter

The exhaust system contains catalytic
converter(s) to reduce harmful exhaust
emissions.

WARNING

EWA10863

The exhaust system is hot after op-
eration. To prevent a fire hazard or
burns:

Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.

Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.

Make sure that the exhaust sys-
tem has cooled down before
doing any maintenance work.

Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.

EAU93101

Seats

Passenger seat

To remove the passenger seat

1. Insert the key into the seat lock,

and then turn it clockwise.

2. Lift the front of the passenger seat

and pull it forward.

To install the passenger seat

1. Insert the projection on the rear of

the passenger seat as shown.

1. Seat lock
2. Unlock.

1

1

1

2

2

UBEB20E0.book  Page 18  Monday, September 6, 2021  11:24 AM

Содержание YZF660N 2022







































































































Отзывы: