manualshive.com logo in svg

Yamaha YZF-R1, Руководство пользователя, Страница: 99 / 130

Поделиться
Скачать
Yamaha YZF-R1 Скачать руководство пользователя страница 99

Periodic maintenance and adjustment

7-20

1

2

3

4

5

6

7

8

9

10

11

12

WARNING

EWA10601

This motorcycle is fitted with su-
per-high-speed tires. Note the fol-
lowing points in order to make the
most efficient use of these tires.

Use only the specified replace-
ment tires. Other tires may run
the danger of bursting at super
high speeds.

Brand-new tires can have a rela-
tively poor grip on certain road

surfaces until they have been
“broken in”. Therefore, it is ad-
visable before doing any
high-speed riding to ride con-
servatively for approximately
100 km (60 mi) after installing a
new tire.

The tires must be warmed up
before a high-speed run.

Always adjust the tire air pres-
sure according to the operating
conditions.

EAU66460

Cast magnesium wheels

To maximize the performance, durabil-
ity, and safe operation of your motorcy-
cle, note the following points regarding
these wheels.

The wheel rims should be checked
for cracks, bends, warpage or
damage before each ride. If any
damage is found, have a Yamaha
dealer replace the wheel. Do not
attempt even the smallest repair to
the wheel. A deformed or cracked
wheel must be replaced.

The wheel should be balanced
whenever the tire or wheel has
been changed or replaced. An un-
balanced wheel can result in poor
performance, adverse handling
characteristics, and shortened tire
life.

These wheels are made of magnesium
and require special care.

When balancing the wheel, use
press-on type weights to avoid
scratching the wheel.

Regularly inspect the wheel for
nicks and scratches. Use touch-up
paint or other sealant to prevent

Front tire:

Size:

120/70ZR17M/C (58W)

Manufacturer/model:

BRIDGESTONE/BATTLAX RAC-
ING STREET RS10F

Rear tire:

Size:

190/55ZR17M/C (75W) (YZF-R1)
200/55ZR17M/C (78W) 
(YZF-R1M)

Manufacturer/model:

BRIDGESTONE/BATTLAX RAC-
ING STREET RS10R

FRONT and REAR:

Tire air valve:

TR412

Valve core:

#9100 (original)

BX4-9-E1_1.book  20 ページ  ２０１８年４月２７日　金曜日　午後４時３分

Содержание YZF-R1



































































































































Отзывы:

Нет отзывов