Perio
d
ic maintenance an
d
a
d
justment
7-28
7
EAU75190
Supportin
g
the motorcycle
Since this model is not equipped with a
centerstand, use a maintenance stand
when removing the front or rear wheel,
adjusting the chain or washing the ve-
hicle, etc.
Check that the motorcycle is in a stable
and level position before starting any
maintenance.
TIP
If a suitable maintenance stand is not
available, a strong wooden box can be
used instead.
EAU24361
Front wheel
EAU56371
To remove the front wheel
WARNING
EWA10822
To avoi
d
injury, securely support the
vehicle so there is no
d
an
g
er of it
fallin
g
over.
1. Loosen the axle nut.
2. Lift the front wheel off the ground
according to the procedure in the
previous section “Supporting the
motorcycle”.
3. Remove the axle nut and washer.
4. Pull the wheel axle out, and then
remove the wheel.
NOTICE:
Do
not apply the
b
rake after the
wheel an
d
b
rake
d
isc have
b
een
remove
d
, otherwise the
b
rake
pa
d
s will
b
e force
d
shut.
[ECA11073]
1. Maintenance stand (for off-road motorcycle)
1
1. Washer
2. Axle nut
U1SN85E0.book Page 28 Friday, June 10, 2016 1:20 PM