Yamaha YZ85( P) /LC Скачать руководство пользователя | Manualshive

Страница: 66 / 88

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-22

7

EAU22760

Drive chain slack

The drive chain slack should be
checked before each ride and adjusted
if necessary.

EAU41411

To check the drive chain slack

1. Install the removable sidestand

and place the motorcycle on it.

TIP

When checking and adjusting the drive
chain slack, there should be no weight
on the motorcycle.

2. Shift the transmission into the neu-

tral position.

3. Measure the drive chain slack as

shown.

4. If the drive chain slack is incorrect,

adjust it as follows.

EAU41483

To adjust the drive chain slack

Consult a Yamaha dealer before ad-
justing the drive chain slack.

1. Loosen the axle nut and the lock-

nut on each side of the swingarm.

2. To tighten the drive chain, turn the

drive chain slack adjusting bolt on
each side of the swingarm in direc-
tion (a). To loosen the drive chain,
turn the adjusting bolt on each side
of the swingarm in direction (b),
and then push the rear wheel for-
ward.

NOTICE:

Improper drive

chain slack will overload the en-

gine as well as other vital parts
of the motorcycle and can lead
to chain slippage or breakage.
To prevent this from occurring,
keep the drive chain slack with-
in the specified limits.

[ECA10571]

TIP

Using the alignment marks on each
drive chain puller, make sure that both
drive chain pullers are in the same po-
sition for proper wheel alignment.

3. Tighten both locknuts and the axle

nut to the specified torques.

Drive chain slack:

35.0–45.0 mm (1.38–1.77 in)

1. Drive chain slack

1. Axle nut

2. Drive chain puller
3. Locknut

4. Drive chain slack adjusting bolt

5. Alignment marks

5

4

3

2

U1SN80E0.book Page 22 Thursday, June 9, 2011 11:24 AM

«
...
64
65
66
67
68
...
»

Содержание YZ85( P) /LC

























































































Отзывы:

Нет отзывов

Похожие инструкции для YZ85( P) /LC

Бренд: Honda Страницы: 91

Бренд: Parweld Страницы: 4

LIX9U0003740299

Бренд: X-lite Страницы: 116

Бренд: Kabuto Страницы: 20

Бренд: Yamaha Страницы: 122

Бренд: Yamaha Страницы: 142

Бренд: Yamaha Страницы: 118

Бренд: Gilera Страницы: 396

Бренд: Vanucci Страницы: 35

Бренд: Yamaha Страницы: 80

Бренд: Yamaha Страницы: 278

Бренд: SILENCE Страницы: 68

Бренд: Careflon Страницы: 16

Бренд: Petzl Страницы: 12

Бренд: hepco & becker Страницы: 3

Бренд: KTM Страницы: 13

Бренд: Honda Страницы: 84

Бренд: KTM Страницы: 100

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды