Yamaha YZ65, Руководство пользователя

Страница: 35 / 92

Instrument an d control functions
4-9
4
2. Make sure the seat is in its original
position.
3. Install the bolt at the rear of the
seat.
TIP

When removing and installing the
seat, be careful not to damage the
seat with a tool.

Make sure that the seat is properly
secured before riding.
EAU84383
A d justin g the front fork
WARNING
EWA10181
Always a d just b oth fork le g s equally,
otherwise poor han d lin g an d loss of
sta b ility may result.
This front fork is equipped with re-
bound damping force adjusting screws
and compression damping force ad-
justing screws.
NOTICE
ECA10102
To avoi d d ama g in g the mechanism,
d o not attempt to turn b eyon d the
maximum or minimum settin g s.
Re b oun d d ampin g force
1. Remove the protector.
2. Turn the adjusting screw in direc-
tion (a) to increase the rebound
damping force. Turn the adjusting
screw in direction (b) to decrease
the rebound damping force. To
set the rebound damping force,
turn the adjuster in direction (a)
until it stops, and then count the
clicks in direction (b).
1. Slot
2. Projection
3. Seat holder
3
2
1
2
1. Protector
1
UBR881E0.book Page 9 Tuesday, April 2, 2019 9:44 AM