Yamaha YZ65, Руководство пользователя

Страница: 40 / 92

Instrument an d control functions
4-14
4
8. Tighten the locknut to the speci-
fied torque.
NOTICE:
Always
ti g hten the locknut a g ainst the
a d justin g nut, an d then ti g hten
the locknut to the specifie d
torque.
[ECA10122]
9. Install the rear frame assembly as
shown, and then tighten the rear
frame bolts to the specified
torque.
10. Install the muffler, and then tighten
the muffler bolt to the specified
torque.
11. Place the panels in their original
position, and then install the bolts.
12. Tighten the clamp bolt.
13. Install the seat.
Re b oun d d ampin g force
Turn the adjusting screw in direction (a)
to increase the rebound damping for-
ce.
Turn the adjusting screw in direction (b)
to decrease the rebound damping for-
ce.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the clicks in di-
rection (b).
1. Distance A
Sprin g preloa d :
Minimum (soft):
Distance A = 205.5 mm (8.09 in)
Standard:
Distance A = 199.0 mm (7.83 in)
Maximum (hard):
Distance A = 195.0 mm (7.68 in)
Ti g htenin g torque:
Locknut:
30 N·m (3.0 kgf·m, 22 lb·ft)
1
Ti g htenin g torque:
Rear frame bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
Ti g htenin g torque:
Muffler bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
UBR881E0.book Page 14 Tuesday, April 2, 2019 9:44 AM