Yamaha YZ450FP 2023, Руководство по эксплуатации для владельца

Страница: 69 / 388

CABLE ROUTING DIAGRAM
2-24
1. Throttle cable
2. Start switch lead
3. Handlebar switch lead (left)
4. Clutch cable
5. Front brake hose
6. Number plate
7. Plastic locking tie
8. Handlebar protector
9. Upper bracket
10.Protector
A. Route the throttle cable on the right side of
the number plate mounting bracket.
B. Route the start switch lead on the left side of
the number plate mounting bracket.
C. Route the start switch lead, handlebar switch
lead (left), and clutch cable on the left side of
the number plate mounting bracket between
the upper guide of the number plate and the
upper bracket.
D. Route the front brake hose through the num-
ber plate upper guide.
E. Secure the start switch lead and handlebar
switch lead (left) to the handlebar using the
plastic locking tie. Point the lock portion of the
plastic locking tie to the upper part of the
vehicle while pointing the end to the front side
of the vehicle without cutting off it.
F. Secure the handlebar and handlebar
protector with the plastic locking tie. Point the
lock portion of the plastic locking tie to the
lower side of the vehicle. The direction of the
end does not matter.
G. When installing the protector, the clearance
and direction of it does not matter.
H. Fasten the front brake hose and protector
with the plastic locking tie. Point the lock por-
tion to the inside of the vehicle, and then cut
off the end of the plastic locking tie.
I. Place the lock portion within the area shown
by the arrow.
J. Route the cables according to the instruc-
tions on the number plate.