Yamaha YZ450FN 2022, Руководство по эксплуатации для владельца

Страница: 237 / 366

CLUTCH
5-51
2. Install:
• Dowel pin “1”
•
O-ring “2”
• Collar “3”
•
Gasket “4”
TIP
Apply the lithium-soap-based grease on the O-
ring.
3. Install:
•
Right crankcase cover “1”
• Right crankcase cover bolt “2”
TIP
•
Apply the engine oil on the impeller shaft end.
• When installing the crankcase cover onto the
crankcase, make sure that the impeller shaft
end “3” aligns with the balancer end slot “4”.
•
Tighten the right crankcase cover bolts in stag-
es and in a crisscross pattern.
4. Install:
•
Push lever shaft “1”
TIP
• Apply the lithium-soap-based grease on the oil
seal lip.
• Before installation, apply the engine oil to the
bearings (upper side and lower side).
5. Install:
•
Primary driven gear “1”
• Thrust washer “2”
•
Clutch boss “3”
TIP
Apply the engine oil on the primary driven gear
inner circumference.
Right crankcase cover bolt
10 N·m (1.0 kgf·m, 7.4 lb·ft)
3
2
1
LS
Ne w
Ne w
4 4
1 1
1 1
2 2
3 3
T
R
.
.
1 1
2 2
1
E