4-4
4
EBU34931
Shift timing indicator light
This indicator light can be set to come on and
go off at the desired engine speeds and is
used to inform the driver when it is time to up-
shift.
The electrical circuit of the indicator light can
be checked by turning the key to “
” (on). If
the indicator light does not come on initially
when the key is turned to “
” (on), or if the
indicator light remains on, have a Yamaha
dealer check the electrical circuit.
TIP
See page 4-16 for a detailed explanation of
this indicator light and how to set it.
EBU35282
Coolant temperature warning light “
”
This warning light comes on when the coolant
temperature, and therefore the engine, is out-
side its normal operating temperature range.
The warning light comes on in blue to inform
the driver that the vehicle should be warmed
up. After the engine is started, warm it up until
the warning light goes off.
The vehicle can be operated normally when
the warning light is off.
The warning light comes on in red when the
engine is overheating. If the red light comes
on, stop the vehicle as soon as it is safe to do
so and allow the engine to idle for about 10
minutes. If the warning light does not go off,
stop the engine and allow it to cool. (See page
8-67.)
TIP
The coolant temperature warning light can be
checked by turning the key to “
” (on). The
warning light should come on in purple briefly
(which confirms that both the blue and red in-
dicators are okay) and then go off. If the warn-
ing light does not come on at all, comes on in
red or blue, or if the warning light remains on,
have a Yamaha dealer check the vehicle.
UB5712E0.book Page 4 Friday, October 21, 2016 10:19 AM
