manualshive.com logo in svg

Yamaha YXZ 1000R YXZ10YMXN, Руководство пользователя, Страница: 48 / 204

Поделиться
Скачать
Yamaha YXZ 1000R YXZ10YMXN Скачать руководство пользователя страница 48

5-17

5

that the electric starter will not have
enough power to crank the engine. If this
should happen, remove the battery and re-
charge it.

 

EBU39121

On–Command drive knob 
“2WD/4WD/DIFF. LOCK”

Stop the vehicle and move the On–Command
drive knob to change the drive mode to two–
wheel drive, four–wheel drive, or four–wheel

drive with differential lock. Select the appro-
priate drive according to the terrain and driv-
ing conditions.

“2WD” (two–wheel drive): Power is sup-
plied to the rear wheels only.

“4WD” (four–wheel drive): Power is sup-
plied to the front and rear wheels.

“DIFF. LOCK” (four–wheel drive with the
differential gear locked): Power is supplied
to the front and rear wheels with the differ-
ential gear locked. Unlike standard four–
wheel drive, all wheels turn at the same
speed regardless of traction.

TIP

Maximum vehicle speed is limited to approx-
imately 65 km/h (40 mi/h) when “DIFF. LOCK”
is selected.

 

1. On-Command drive knob “2WD/4WD/DIFF. LOCK”

1

UB5J13E0.book  Page 17  Thursday, December 16, 2021  12:52 PM

Содержание YXZ 1000R YXZ10YMXN













































































































































































































Отзывы:

Нет отзывов