Yamaha YXZ 1000R SS 2022 Скачать руководство пользователя

Страница: 104 / 216

7-13

WARNING

EWB04340

Improper loading or pulling, or any towing
will increase the risk of loss of control, an
overturn, or other accident:



Do not pull objects, other vehicles, or
tow a trailer—this vehicle is not de-
signed for such operation.



YXZ10YEZN: Use only the winch to pull a
load or recover a vehicle.



Keep weight in the cargo bed centered
side to side, and as low and as far for-
ward as possible. Top-heavy loads in-
crease the risk of overturn.



Make sure that cargo is securely fas-
tened down—a loose load could change
handling unexpectedly or strike occu-
pants.



Do not exceed the maximum loading
limit for the cargo bed: 136.0 kg (300 lb).



Do not exceed the maximum loading
limit for the vehicle: 328.0 kg (723 lb).

UBAS12E0.book Page 13 Monday, November 29, 2021 10:56 AM

Содержание YXZ 1000R SS 2022

























































































































































































































Результаты поиска

Содержание YXZ 1000R SS 2022

Отзывы:

Похожие инструкции для YXZ 1000R SS 2022

Бренды по названию

Популярные бренды

Yamaha YXZ 1000R SS 2022, Руководство пользователя

Результаты поиска

Содержание YXZ 1000R SS 2022

Отзывы:

Похожие инструкции для YXZ 1000R SS 2022

Бренды по названию

Популярные бренды