YST-SW45
1
2
2
2
Fig. 2
Fig. 1
3
■
DISASSEMBLY PROCEDURES
(Remove parts in the order as numbered.)
1. Removal of Front Grille
The front grille is fixed to the cabinet with dowels at 4
locations.
As a screwdriver (for slotted head screw) is used for
removal, use special care not to cause damage to the
cabinet.
a. Apply the block to the rear panel so as to avoid damage
to the Terminal of the rear panel.
b. Use the screwdriver inserted in the gap between the
front grille and the cabinet (bottom side first), push up
the front grille. (Fig. 1)
c. Remove the front grille by lifting it up. (Fig. 1)
2. Remove of Speaker
a. Remove 4 screws (
1
) in Fig. 2, and remove the
speaker.
b. Remove the cable cord.
3. Removal of the Rear Panel
a. Remove 10 screws (
2
) in Fig. 2, and remove the rear
panel.
* When removing the rear panel, replacing the packing.
