5
YST-MS50/YST-MS55D
YST-MS50
YST-MS55D
■
DISASSENBLY PROCEDURES
(Remove parts in disassenbly order as numbered.)
•
Disassemble of the Subwoofer
1. Removal of the Rear Panel Ass'y.
a. Remove 8 screws (
1
) in Fig. 1, and remove the rear
panel ass'y.
b. Disconnect one connector in Fig. 1.
c. Disconnect the Speaker cord in Fig. 1.
2. Removal of the Front Panel Ass'y
The front panel assy is fixed to the cabinet with dowels at 6
locations.
* As a screwdriver (for slotted head screw) is used for
removal, use special care not to cause damage to the
Cabinet.
a. Using the screwdriver insert in the gaps between the front
panel ass'y and cabinet, push up the front panel ass'y.
b. Remove the front panel ass'y while taking it out.
(Front panel ass'y can not to remove completely.)
3. Removal of the Speaker
a. Set up the front panel ass'y in the direction of the arrow,
in Fig. 2.
b. Remove 4 screws (
2
) in Fig. 2, and remove the
speaker.
Fig. 2
Fig. 1
Dowels
Front Panel Ass'y
Cabinet
Connector
Gaps
Speaker Cord
Rear Panel Ass'y
Speaker
Front Panel Ass'y
1
2
