background image

SERVICE  MANUAL

DIGITAL SOUND PROJECTOR

YSP-800

CONTENTS

TO SERVICE PERSONNEL .......................................... 2
FRONT PANEL .............................................................. 3
REAR PANELS .............................................................. 3
BOTTOM PANEL ........................................................... 4
REMOTE CONTROL PANELS ...................................... 4
SPECIFICATIONS / 

参考仕様

........................................ 5

INTERNAL VIEW ........................................................... 5
SET MENU TABLE ........................................................ 6
SERVICE PRECAUTIONS / 

サービス時の注意事項

..... 7

DISASSEMBLY PROCEDURES

 / 分解手順

........... 7~12

UPDATING FIRMWARE

 /

ファームウェアの書き込み

..................................... 13~23

SELF DIAGNOSIS FUNCTION (DIAG)

 /

自己診断機能(ダイアグ)

..................................... 24~40

DISPLAY DATA ........................................................... 41
IC DATA ................................................................. 42~43
BLOCK DIAGRAM ....................................................... 44
PRINTED CIRCUIT BOARD .................................. 45~53
PIN CONNECTION DIAGRAM .................................... 54
SCHEMATIC DIAGRAM ........................................ 55~60
PARTS LIST ........................................................... 61~77
REMOTE CONTROL .............................................. 78~79
YSP-800 Packing Instruction / 

梱包手順説明書

..... 80~81

1 0 0 9 6 6

IMPORTANT NOTICE

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.

WARNING:

Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified.  For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.

IMPORTANT:

The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.

The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover.  The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products.  Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit.  Should any discrepancy appear to exist, please
contact the distributor's Service Division.

WARNING:

Static discharges can destroy expensive components.  Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).

IMPORTANT:

Turn the unit OFF during disassembly and part replacement.  Recheck all work before you apply power to the unit.

P.O.Box 1, Hamamatsu, Japan

 2005                                         All rights reserved.

This manual is copyrighted by YAMAHA and may not be copied or

redistributed either in print or electronically without permission.

YSP-800

When transporting this unit, be sure to use the unit’s packing materials and box so as to protect
it against any damage, in particular, dents in the front grille during transportation.

本機を輸送する場合、輸送時の破損(特に、フロントグリルのへこみ)等を防ぐために必ず専用の梱
包箱を使用してください。

 '05.09

Содержание YSP 800 - Digital Sound Projector Five CH...



















































































Отзывы: