22
En
y
• You can select an audio signal to be played back (Auto or DTS)
In “Decoder Mode” (page 32).
■
Input channel indicators
Depending on the channel component of the current
digital input signal, the input channel indicators in the
front panel display light up as follows:
y
• Extra (EX1/EX2) indicators light up when 7.1-channnel signals
recorded in a Blu-lay disc (etc.) are being input. Normally,
surround back channel signals are recorded in the extra
channels. This may vary depending on the disc.
You can select the playback method (surround or stereo), desired CINEMA DSP program and decoder to enjoy playback
of the input source.
Use to select the playback method (surround or stereo).
See also: “ Enjoying CINEMA DSP programs” (page 22),
“Changing the audio output method for surround
playback” (page 23).
Press
F
SURROUND or
F
STEREO.
You can enjoy high realistic sensation with surround
playback and hi-fi sound with stereo playback.
y
• Normal sounds (not sound beams) are output from the front
right and front left channels. When you play back multi-channel
sources, all signals except those from the front right and left
channels are mixed down and output from the front right and
left channels.
• When the stereo playback is selected, CINEMA DSP (page 22)
and the decoder (page 24) become ineffective.
This unit is equipped with a Yamaha CINEMA DSP
(digital sound field processing) chip containing several
sound field programs used to enhance your playback
experience. Most of the CINEMA DSP programs are
precise digital recreations of actual acoustic environments
of famous concert halls, music venues, and movie theaters.
y
• When you enjoy the CINEMA DSP programs, press
F
SURROUND to select the surround playback, and then follow
the steps below.
• The CINEMA DSP programs are not available in the following
conditions.
– Stereo playback is selected.
– HD audio signals are being played back.
– Audio signals with sampling frequency of higher than 96 kHz
are being played back.
– Audio signals are output from the PRE OUT jacks.
Status
Indicator
When PCM signals are being
input
When Dolby TrueHD signals are
being input
When Dolby Digital Plus signals
are being input
When Dolby Digital signals are
being input
When Dolby Pro Logic is
selected as the surround decoder
When Dolby Pro Logic II is
selected as the surround decoder
When Dolby Pro Logic IIx is
selected as the surround decoder
When DTS HD Master Audio
signals are being input
+ HD
+ MSTR
When DTS HD High Resolution
signals are being input
+ HD
+ HI RES
When DTS digital signals are
being input
When DTS 96/24 signals are
being input
+
When DTS ES discrete is
selected as the surround decoder
+ ES
+ DSCRT
When DTS ES matrix is selected
as the surround decoder
+ ES
+ MTRX
When DTS Neo:6 is selected as
the surround decoder
+ Neo:6
PCM
DIGITAL
PL
PL
Input signal
Indicator
2-channel stereo
5.1-channel
6.1-channel
7.1-channel
L
C
R
SL
SB
SR
EX1 LFE EX2
Center
Front L
Surround L
Extra 1
Surround back
Front R
Surround R
Extra 2
LFE
Playback mode
Selecting surround or stereo
playback
Enjoying CINEMA DSP programs
E
CINEMA DSP
E
OFF
F
STEREO
F
SURROUND
G
ENTER
G
/
G
/
G
I
SETUP
0
+10
ENT
7
8
9
4
5
6
1
2
3
HDMI 4
iPod
RADIO
ENTER
SURROUND
STEREO
OFF
ENTER
TAINMENT
MUSIC
CINEMA DSP
MOVIE
HDMI 1
HDMI 2
HDMI 3
TV
AUX 1
AUX 2
TV
AV
MENU
TOP MENU
OPTION
TV
MUTE
CODE SET
UNIVOLUME
SUR. DECODE INTELLIBEAM
TV
INPUT
MUTE
TV VOL
CH
VOLUME
SETUP
RETURN
MEMORY
SLEEP
INFO
TUNING
PRESET
CATEGORY
E
F
OPTION
SETUP
RETURN
I
ENTER
G
