Initial settings
En
27
PREP
ARAT
IONS
PLA
YBA
CK
SET
TIN
GS
TR
OUBLES
HOOTING
APP
END
IX
English
4
Press the
S
/
T
key to select one of the items below
and then press the
X
key or ENTER key.
Settings
5
Connect the IntelliBeam microphone to this unit
after “AUTO SETUP (PREPARATION & CHECK)”
screen is displayed.
For details on connecting IntelliBeam microphone, refer to
“Using AUTO SETUP (IntelliBeam)” (p. 25).
6
Follow steps 4, 5, and 6 under “Using AUTO SETUP
(IntelliBeam)” to configure settings, and then
remove the microphone.
• When the AUTO SETUP procedure is performed from the setup menu, the menu
selection screen of the setup menu appears.
BEAM+SOUND
OPTIMIZE
Select this optimization feature if you make
settings for the first time. This menu takes
about 3 minutes.
BEAM OPTIMIZE ONLY
Use to optimize the beam angle so that the
parameter best matches your listening
environment. This menu takes about 1
minute.
SOUND OPTIMIZE
ONLY
Use to optimize the beam delay, volume,
and quality so that the parameters best
match your listening environment. This
menu takes about 2 minutes.
You must optimize the beam angle with
“BEAM OPTIMIZE ONLY” before starting
“SOUND OPTIMIZE ONLY”. Select this
optimization feature in the following cases:
• If you have opened or closed the curtains
in your listening room before using this
unit
• If you have manually set the beam angle
with “BEAM OPTIMIZE ONLY”.
/
/
ENTER
