– 5 –
Engine switch
The engine switch controls the ignition system.
1
“ON” (ON)
Ignition circuit is switched on.
The engine can be started.
2
“OFF” (OFF)
Ignition circuit is switched off.
The engine will not run.
Throttle lever
The throttle lever controls the engine speed. Move the
throttle lever in direction
2
to increase engine speed.
Move the throttle lever in direction
1
to decrease
engine speed.
a
Throttle lever
NOTICE
Always check throttle operation before starting the
engine.
1
2
1
2
a
CONTROL FUNCTION
Oil warning light (Red)
When the oil level falls below the lower level, the oil
warning light comes on and then the engine stops
automatically. Unless you refill with oil, the engine will
not start again.
TIP
If the engine stalls or does not start, turn the engine
switch to “ON” (ON) and then pull the recoil starter. If
the oil warning light flickers for a few seconds, the
engine oil is insufficient. Add oil and restart.
9C9-28199-70-E0.indd 5
2015/01/26 16:15:11
Содержание YP20T
Страница 39: ...9C9 28199 70 E0 indd 34 2015 01 26 16 15 20 ...
Страница 79: ...9C9 28199 70 F0 indd 34 2015 01 26 16 16 04 ...