Yamaha YID-W10, Руководство пользователя

Страница: 9 / 92

7
En
Green: lights up
Red: Off
No sound. The volume is set to the
minimum. Set the volume properly.
Your Yamaha component is
turned off. Turn on your Yamaha
component.
The input source of your
Yamaha component is not
set properly. Set the input source
properly.
Earphones or other device
are connected to your iPod/
iPhone. Disconnect earphones or
other device.
The volume of
iPod/iPhone
does not change
when you
operate the
volume of your
Yamaha
component. Wireless communications
are established between this
unit’s transmitter and
multiple “AirWired” devices
simultaneously. Set the group IDs of the
other “AirWired” devices to
the different value.
Sound is output
suddenly despite
your iPod/
iPhone is not
connected to the
transmitter. Wireless communication is
established between the
receiver and another
“AirWired” device. Set the group ID of another
“AirWired” device to the
different value.
Ring tone is
output from your
Yamaha
component when
your iPhone
receives an
incoming call. Ring tone is output from
your Yamaha component
when your iPhone receives
an incoming call. If you do not want your
Yamaha component to
output ring tone, set your
iPhone to the silent mode.
The battery is
not charged. The battery charge function
is not activated on your
Yamaha component. Change the setting of your
Yamaha component
referring to its owner’s
manual.
The Wi-Fi
communication
is unstable when
you are using
YID-W10. The signal from YID-W10
interferes with Wi-Fi
communication. Disconnect your iPod/
iPhone from the transmitter,
and then reconnect firmly
after a while.
If this situation occurs
frequently, move YID-W10
away from the Wi-Fi
components.
Transmitter
LED
Problem Cause Remedy