background image

11

1

Select a track which has index numbers. 

2

3

Select the desired index number.

Notes

Not all discs have index numbers.  The index system is a
method for sub-dividing tracks into smaller divisions (such
as, for example, the movements within classical
symphonies) for easier location of those parts.  The liner
notes with the disc usually tell if such index numbers are
included.

If an index number is selected that is higher than any index
number on that disc, play will start from the last index
number point on the disc.

For some discs, play may begin slightly prior to the actual
designated index point.

If the disc has no encoded index points, play will begin from
the start of the selected track.

The index number can be designated only while the INDEX
number display is illuminated.

To stop program play

Press the STOP button.  The first track number programmed
will be displayed.
To resume play, press the PLAY button.  Play will begin from
the beginning of the program.

To cancel a programmed setting

There are several methods, as described below.

Press the STOP button while the unit is stopped.

Open the disc tray.

Switch off the power.

To check programmed data

1.  If the unit is in the play mode, press the STOP button.
2. Press 

the 

PROG button.

3.  Each time the SKIP

button is pressed, the track

numbers and sequential order of the programmed tracks
can be checked one after another.  The display of the
track number can be returned (sequentially in reverse
order) by pressing the SKIP

button.

To correct programmed data
1.  Follow the procedure described in “To check programmed

data”.

Display the track number to be corrected by pressing the
SKIP button.

3.  Press a numeric button to select a track to replace the one

displayed.  The previously programmed track will be
cleared from the memory and the new one will be
programmed.

4.  After the correction has been completed, once again press

the PROG button or the PLAY button.

INDEX SEARCH

If the disc includes index numbers, play can be started from any desired index number.

PLAY

1

2

3

4

5

6

7

8

9

0

INDEX

SKIP

10

OPEN/
CLOSE

3

INDEX

5

1, 3

2

Содержание YHT-470



















Отзывы: