YHT-21 Q
U I C K
- C
O N N E C T
G
U I D E
9
P
ROGRAMMING
T
HE
R
EMOTE
C
ONTROL
(RAV141)
P
OWER
O
N
1. Load the supplied batteries into the remote control.
2. Aim the unit at the receiver, press RECEIVER/TUN,
and then press POWER.
3. The receiver should turn on.
S
ETTING
U
P
Y
OUR
TV
1. Look up a setup code for your television set (on
pages 35 and 36 of the
R-V703 Owner’s Manual
).
2. Turn on the television set.
3. On the remote control, press TV; then press and
hold SETUP until the indicator LED flashes twice.
4. Using the keypad, enter the three-digit number.
The indicator LED will flash twice after your entry.
5. The TV’s controls are now assigned to the remote
control buttons (see
Quick Reference Card
for use).
To test the code, press TV and then POWER. If the
TV does not respond, try an alternate code.
S
ETTING
U
P
Y
OUR
C
ABLE
B
OX
(
OR
DSS)
1. Look up a setup code for your cable box or digital
satellite system (see page 33 through 35 of the
R-V703
Owner’s Manual
).
2. Turn on the cable box (or DSS).
3. On the remote control, press CBL/DSS; then press and
hold SETUP until the indicator LED flashes twice.
4. Using the keypad, enter the three-digit number.
The indicator LED will flash twice after your entry.
5. The unit’s controls are now assigned to the remote
control buttons (see
Quick Reference Card
for use).
To test the code, press CBL/DSS and then POWER.
If the unit does not respond, try an alternate code.
S
ETTING
U
P
Y
OUR
VCR
1. Look up a setup code for your VCR (on page 36 of
the
R-V703 Owner’s Manual
).
2. Turn on the VCR.
3. On the remote control, press VCR; then press and
hold SETUP until the indicator LED flashes twice.
4. Using the keypad, enter the three-digit number.
The indicator LED will flash twice after your entry.
5. The VCR’s controls are now assigned to the remote
control buttons (see
Quick Reference Card
for use).
To test the code, press VCR and then POWER. If the
unit does not respond, try an alternate code.
continued on the next page...
The YHT-21 Home Theater package includes the
RAV141 Remote Control. It comes pre-programmed
with factory codes to control your R-V703 receiver
and most Yamaha audio components. To program
other brands of components (i.e., TV, VCR, etc.) or if
your Yamaha unit does not respond, you will need to
program the remote control with the manufacturer’s
codes (listed on pages 33 through 36 of the
R-V703
Owner’s Manual
).
NOTE: The RAV141 is designed to control most major
brands of audio and video components. For other units, use
the original remote control supplied with the product.
Perform the procedure for each component you own.
At the end of step 5, the remote control’s processor will
automatically assign the selected component’s control
functions to its own buttons, ready for your use.
NOTE: To clear the RAV141’s memory and return it to
the factory codes, press and hold SETUP; then enter 9 8 1.
1
2
3
4
5
6
7
8
0
9
DVD
LD
CD
TAPE
TUN
RECEIVER
SET
UP
PLAY
PRG +
PRG –
POWER
REW
TV
INPUT
PAUSE
FF
STOP
DIR A
DIR B
SLEEP
TV
MUTE
TIME/
LEVEL–
DLY/CNT/REAR
TIME/
LEVEL+
UP
LEFT
RIGHT
MENU
DOWN
SKIP/CHAPTER
+100
—
—
+
+
DECK A/B
A/B/C/D/E
EFFECT
ON/OFF
DISC SKIP
PRESET
RAV141
VZ44810
REC/
PAUSE
TV
VCR
CBL/
DSS
CH
VOL
INPUT SELECT
CD
TAPE
TUNER
PHONO
TV/DBS
TEST
DVD/LD
VCR
ENT
DISP
Indicator LED
Use Keypad
To Enter
Setup Codes
Turns On
Component’s
Power
Components
(Devices)
Components
(Devices)
For Code Setup
Содержание YHT-21
Страница 1: ...1ST DRAFT QUICK CONNECT GUIDE YHT 21 ...
Страница 2: ......
