Yamaha YFZ450RSSE Скачать руководство пользователя

Страница: 124 / 154

8-35

5. To increase the clutch lever free play, turn the

clutch lever free play adjusting nut located to-
wards the center of the cable in direction (a),
and to decrease it, turn the nut in direction (b).

6. Tighten the locknut.
7. Slide the rubber cover to its original position.

TIP

If the specified free play cannot be obtained as de-
scribed above or if the clutch does not operate
correctly, have a Yamaha dealer check the internal
clutch mechanism.

EBU26865

Drive chain slack

The drive chain slack should be checked before
each ride and adjusted if necessary.

To check the drive chain slack

1. Place the ATV on a level surface.

TIP

When checking and adjusting the drive chain
slack, there should be no weight on the ATV and
all tires must be touching the ground.

2. Move the ATV back and forth to locate the

tightest portion of the drive chain, and then
measure the drive chain slack as shown.

1. Locknut
2. Clutch lever free play adjusting nut (clutch cable)
3. Rubber cover

(b)

(a)

Drive chain slack:

25.0–35.0 mm (0.98–1.38 in)

U1TD6AE0.book Page 35 Wednesday, January 8, 2014 8:46 AM

Содержание YFZ450RSSE



























































































































































Результаты поиска

Содержание YFZ450RSSE

Отзывы:

Похожие инструкции для YFZ450RSSE

Бренды по названию

Популярные бренды

Yamaha YFZ450RSSE, Руководство пользователя

Результаты поиска

Содержание YFZ450RSSE

Отзывы:

Похожие инструкции для YFZ450RSSE

Бренды по названию

Популярные бренды