manualshive.com logo in svg

Yamaha YFZ05YYXH, Руководство пользователя, Страница: 63 / 132

Поделиться
Скачать
Yamaha YFZ05YYXH Скачать руководство пользователя страница 63

7-3

7

teristics. Take the time to learn the basic techni-
ques well before attempting more difficult
maneuvers. 

Not recommended for children under 6 years
of age.

WARNING

EWB01751

A child under 6 should never operate an ATV
with engine size greater than 50 cc. Use by
children of ATVs that are not recommended for
their age can lead to severe injury or death of
the child.

 

This ATV is designed to carry the operator only
– passengers prohibited.

The long seat is to allow the operator to shift posi-
tion as needed during operation. It is not for carry-
ing passengers. 

WARNING! Never carry a

passenger. Carrying a passenger on this ATV
greatly reduces your ability to balance and
control this ATV. You could have an accident,
resulting in severe injury or death to you and/or
your passenger.

 [EWB01402]

UBW460E0.book  Page 3  Monday, May 23, 2016  11:12 AM

Содержание YFZ05YYXH





































































































































Отзывы:

Нет отзывов