Yamaha YFS200R 2002, Руководство по обслуживанию

Страница: 26 / 75

– 18 –
CHK
ADJ
CHECKING THE BRAKE HOSES/
BLEEDING THE HYDRAULIC BRAKE SYSTEM
4.Install:
●
Front panel
Refer to “REPLACING THE HEADLIGHT
BULB”.
BLEEDING THE HYDRAULIC BRAKE
SYSTEM
WARNING
Bleed the brake system if:
●
The system has been disassembled.
●
A brake hose or brake pipe have been
loosened or removed.
●
The brake fluid has been very low.
●
The brake operation has been faulty.
A loss of braking performance may occur if
the brake system is not precisely bled.
1.Bleed:
●
Brake system
*****************************************************
Air bleeding steps:
a.Add proper brake fluid to the reservoir.
b.Install the diaphragm. Be careful not to spill
any fluid or allow the reservoir to overflow.
c.Connect the clear plastic hose
1
tightly to
the caliper bleed screw
2
.
È
Front
É
Rear
d.Place the other end of the hose into a con-
tainer.
e.Slowly operate the brake lever or pedal
several times.
f. Pull the lever in or push down on the pedal.
Hold the lever or pedal in position.
g.Loosen the bleed screw and allow the lever
or pedal to travel towards its limits.
h.Tighten the bleed screw when the lever or
pedal limit has been reached, and then
release the lever or pedal.
i. Repeat steps (e) to (h) until all air bubbles
have disappeared from the fluid.
1
2
È
1
2
É