Yamaha YFM80RX Скачать руководство пользователя страница 87

Страница: 87 / 116

8-19

tion chart.

NOTE:

A diagnostic tachometer is needed to make this

adjustment.

1. Start the engine and warm it up.

NOTE:

The engine is warm when it quickly responds to the

throttle.

2. Attach the tachometer to the spark plug lead.
3. Check the engine idling speed and, if neces-

sary, adjust it to specification by turning the
throttle stop screw at the carburetor. To in-
crease the engine idling speed, turn the throt-
tle stop screw in direction (a), and to decrease
it, turn the screw in direction (b).

NOTE:

If the specified idling speed cannot be obtained as
described above, have a Yamaha dealer make the

adjustment.

EBU27071

Checking the throttle cable free play

The throttle cable free play should be checked at
the intervals specified in the periodic maintenance
and lubrication chart.

1. Throttle stop screw

Engine idling speed:

1700–1900 r/min

(a)

(b)

Содержание YFM80RX





















































































































Результаты поиска

Содержание YFM80RX

Отзывы:

Yamaha YFM80RX, Руководство пользователя, Страница: 87 / 116

Результаты поиска

Содержание YFM80RX

Отзывы: