manualshive.com logo in svg

Yamaha YFM50R, Руководство пользователя

Поделиться
Скачать
Yamaha YFM50R Скачать руководство пользователя страница 88

 

8-17

 

1

2

3

4

5

6

7

8

9

10

11

 

EBU23940

 

Adjusting the carburetor 

 

The carburetor should be checked and, if neces-
sary, adjusted at the intervals specified in the peri-
odic maintenance and lubrication chart. The
carburetor is an important part of the engine and
requires very sophisticated adjustment. Therefore,
most carburetor adjustments should be left to a
Yamaha dealer, who has the necessary profes-
sional knowledge and experience. The adjustment
described in the following section, however, may
be performed by the owner as part of routine main-
tenance.

CAUTION:

 

ECB00480 

 

The carburetor has been set and extensively
tested at the Yamaha factory. Changing these
settings without sufficient technical knowl-
edge may result in poor performance of or

 

damage to the engine.

 

EBU24000

 

Adjusting the engine idling speed 

 

The engine idling speed must be checked and, if
necessary, adjusted as follows at the intervals
specified in the periodic maintenance and lubrica-

tion chart.

NOTE:

 

A diagnostic tachometer is needed to make this

 

adjustment.

1. Start the engine and warm it up.

NOTE:

 

The engine is warm when it quickly responds to the

 

throttle.

2. Attach the tachometer to the spark plug lead.
3. Check the engine idling speed and, if neces-

sary, adjust it to specification by turning the
throttle stop screw at the carburetor. To in-
crease the engine idling speed, turn the throt-
tle stop screw in direction (a), and to decrease
it, turn the screw in direction (b).

Содержание YFM50R





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды