Yamaha YFM35FGY Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 156

Yamaha YFM35FGY Скачать руководство пользователя страница 31

4-12

4

EBU18820

Fuel cock

The fuel cock supplies fuel from the tank to the car-
buretor while also filtering it.
The fuel cock lever positions are explained as fol-
lows and shown in the illustrations.

OFF

With the fuel cock lever in this position, fuel will not
flow. Always turn the fuel cock lever to this position
when the engine is not running.

WHAT CAN HAPPEN
Fuel can spill, which can cause a fire and se-
vere injury.
Fuel expands when it heats up. If the fuel
tank is overfilled, fuel could spill out due to
heat from the engine or the sun.
HOW TO AVOID THE HAZARD
Do not overfill the fuel tank. Be careful not to
spill fuel, especially on the engine or ex-
haust pipe. Wipe up any spilled fuel immedi-
ately. Be sure the fuel tank cap is closed
securely.
Do not refuel right after the engine has been
running and is still very hot.

1. Arrow mark pointing to “OFF”

U5UH16E0.book Page 12 Wednesday, May 7, 2008 10:35 AM

«
...
29
30
31
32
33
...
»

Содержание YFM35FGY





























































































































































Отзывы:

Нет отзывов