Yamaha YFM09RYXH Скачать руководство пользователя страница 95

Страница: 95 / 130

8-13

5. Clean the oil strainer with solvent.
6. Apply a thin coat of clean engine oil to a new

O-ring.

7. Install the oil strainer, the compression

spring, the new O-ring and the engine oil
drain bolt. Tighten the engine oil drain bolt to
the specified torque.

NOTICE:

Before in-

stalling the engine oil drain bolt, be sure to
install the O-ring, compression spring and
oil strainer.

[ECB00322]

8. Refill with the specified amount of the recom-

mended engine oil, and then install and tight-
en the engine oil filler cap.

TIP

Be sure to wipe off spilled oil on any parts after the
engine and exhaust system have cooled down.

NOTICE

ECB00331



Do not use oils with a diesel specification of
“CD” or oils of a higher quality than speci-
fied. In addition, do not use oils labeled “EN-
ERGY CONSERVING II” or higher.



Make sure that no foreign material enters the
crankcase.

1. Engine oil drain bolt
2. O-ring
3. Compression spring
4. Oil strainer

Tightening torque:

Engine oil drain bolt:

15 Nm (1.5 m·kgf, 10 ft·lbf)

Recommended oil:

See page 10-1.

Oil quantity:

0.90 L (0.95 US qt, 0.79 Imp.qt)

UBD361E0.book Page 13 Monday, January 25, 2016 10:53 AM

Содержание YFM09RYXH



































































































































Результаты поиска

Содержание YFM09RYXH

Отзывы:

Yamaha YFM09RYXH, Руководство пользователя, Страница: 95 / 130

Результаты поиска

Содержание YFM09RYXH

Отзывы: