Yamaha YDRE 2007, Руководство владельца/оператора

Страница: 29 / 42

MAINTENANCE
1
2
3
4
5
6
7
8
9
10
11
8-4
JW2
G
Before charging: only add distilled
water if fluid is below the top of the
plates, and then add just enough to
cover plates.
G
After charging: open the vent caps
and look inside the fill wells. Add
distilled water until the electrolyte
level is 1/8" below the bottom of the
fill well. A piece of rubber can be
used safely as a dipstick to help
determine this level. Clean, replace
and tighten all vent caps.
Normal tap water contains
minerals which are harmful to a
battery; therefore, refill only with
distilled water.
3. Using a hydrometer, check the
specific gravity of the battery fluid
in each cell against the readings
on the chart below. Consult a
Yamaha dealer if any low readings
are found, or if readings vary more
than one point between cells.
Temperature
Satisfactory Uncorrected
˚F ˚C
Hydrometer Reading
120 48.9 1.244
110 43.3 1.248
100 37.8 1.252
90 32.2 1.256
80 26.7 1.260
70 21.1 1.264
60 15.6 1.268
50 10.0 1.272
40 4.4 1.276
30 -1.1 1.280
Y-936
PO
S
NEG
1/8”
Electrolyte 1/8” Below
Bottom of Fill Well
Max. Level -
discharged battery
Max. Level -
charged battery
Fill Well
Electrolyte
Y-937
LIT_19626_21_07.qxd 9/18/06 9:24 AM Page 28