3
• 6 x 35 mm round-head screws
1
C
2
R
L
• Use the vinyl tie attached to the bottom of the pedal
box to secure the cord.
• The other vinyl tie will be used later in step
N
.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
19
X
Untie the two vinyl ties.
Untie both vinyl ties and straighten out the bundled cord
attached to the bottom of the pedal box. Use the vinyl tie
attached to the bottom of the pedal box to secure the cord.
Don’t discard the other vinyl tie, you’ll need it later in
step
N
.
C
Attach the side panels (D) to the pedal box
(C).
Place the pedal box on top of the wooden blocks attached
to the side panels (D), and while eliminating any gaps
between the pedal box and side panels, attach using the
four 6
x
35 millimeter round-head screws
1
— two
screws on each side. Make sure the pedals extend in the
same direction as the side panel feet.
